2.5 to 3.5 adapter: hard drive mounting kit supports installing a 2. 5” hard Drive into a 3. 5” internal Hard Drive slot. The mounting fit would fit most 2. 5” SSDs and HDDs.
Simple installation: a complete set of tools needed for installation (screwdriver, screws) is packaged. You can easily utilize unused hard drives to extend capacity of your computer by following simple steps.
High-speed transmission: comes with a SATA cable, supporting 6Gbps bandwidth, backward compatible with SATA I/II. It makes a quick connection available between the hard drive and host.
Sufficient power supply: a 4 pin to 2 x 15 pin SATA power cable. You can connect your Hard drive with your computer via the cable to sufficient power supply.
What you get: 1 x Mounting kit, 1 x screwdriver, 16 x Screws, 1 x 4 pin dual 15 pin SATA power cable, 1 x SATA data cable, 4 x Plastic cushion Ring, 1 x User Manual, and one year.
All Tools Available
Besides the bracket, a 4 pin to dual 15 pin SATA power cable, a 6Gbps SATA cable, one screwdriver, 16 screws and 4 plastic cushion rings are also packaged. A complete set of tools is prepared to expedite your installation.
Screw holes are also placed at the bottom of the bracket to support installation from the bottom, rendering the bracket more steady. There are hollow parts on the bottom and side wings to expedite heat dissipation.
CompatibilityVarious kinds of 2.5” hard drives are supported to be adapted to 3.5” hard drives. It’s an easy way to utilize idle hard drives for additional system storage.
Dimensions: 114mm*101.5mm*10.5mm (4.5in*3.99in*0.41in)
Weight: 59.00 g(.13lb)
1x mounting kit;
1x sata-sata cable;
2x15pin sata cable;
1x starter screwdriver;
4x cushion ring;1x user manual
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.
- Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device