Mesh Hard Drive Enclosure: The metal mesh shell is good for heat dissipation, which dissipates hard drive’s heat efficiently.
Wide Application: The USB 3.0 SATA enclosure supports various kinds of 2.5 inch HDDs/SSDs.
High-speed Transfer: Connects via SuperSpeed USB 3.0, speed up to 5Gbps. UASP Supported, to ensure high-speed transfer.
Universal Compatibility: Compatible with Windows XP/ 7/8/10, Linux, Mac OS 9.1/10.8.4 and above.
Plug and play： Hot-swap, No additional drivers are needed; The enclosure will start idle mode if there is no operation on the hard drive over 10 minutes. It is a way to protect the hard drive.
Unique switch design
Lock the enclosure in case the hard drive in it slips down.
Ensured by SuperSpeed USB 3.0, UASP supported with speed up to 5 Gbps
The enclosure starts idle status if there is no operation on the hard drive over 10 minutes, which is a way to protect your hard drive.
Toggle the switch to unlock state, and then open the enclosure by pushing the back cover.
Lay the hard drive into the enclosure.
Close the cover and then toggle the switch to lock state.
Inateck USB3.0 hard drive enclosure is an ideal solution for you to enjoy your videos, photos, music and files easily by plug in any 2.5 inch SATA HDD/SSD.
Providing unique mesh construction for effective heat dissipation.
Superspeed USB 3.0 connections up to 5 Gbps , Support UASP.
Chipset: JMS578; Designed for 2.5 inch SATA HDD/SSD.
Compatible Operating Systems: Windows XP/ 7/8/10, Linux, Mac OS 9.1/10.8.4 and above.
Plug and Play, No Reboot and Additional Driver is needed; Tool-free; LED activity indicator.
Please Note: As Hot Plug only means that the PC doesn't have to be restarted after disk swaps, it is crucial to disconnect and switch off the enclosure before removing and changing any disk drives, to avoid data loss and structural damage. Please make sure the device is powering off when you plug it out.
SA01002 Hard Drive Enclosure x 1
USB micro B 3.0 to USB standard A cable x 1
Instruction Manual x1
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.
- Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device