Inateck UA1002C black
Supports various kinds of 2.5 inch SATA HDDs and SSDs. Tool free, just plug and play!
SATA III port is equipped with a maximum transfer speed at 6Gbps, backward compatible with SATA I and SATA II.
The adapter uses the high-end ASM1153E chip, which guarantees a lightning transfer speed for a wide range of SSDs.
No extra power adapter needed, the adapter draws power directly from the USB port. Compact and portable design greatly facilitates carrying around.
The adapter can easily connect various kinds of 2.5” SSDs/HDDs to devices equipped with USB C port for extension of storage capacity. Tool free, data becomes accessible once the adapter is plugged in. Hard drives can be switched in 2 seconds. The quick and convenient operation can save you a lot of trouble.
USB Type C Port
The USB Type C Gen 1 port is equipped for a more convenient connection.The UA1002C supports a maximum transfer speed of 400MB/s, equivalent to transferring a 1GB movie within 3 seconds (real transfer speed is subject to actual performance of a hard drive).
SATA III port is equipped with a bandwidth of 6Gbps, backward compatible with SATA I/II.
The adapter uses the high-end ASM1153E chip to ensure a higher performance and steadier operation. The external shell uses anti-pressure and heat-resistant ABS material that effectively relieves your worry of overheating.
Note: The start power of some old or large-capacity mechanical HDD is very high. Please visit the official site of such HDD and look for its power information, to see if it is beyond the rated voltage/current of USB port, 5V/0.9A, when use UA1002C with it.
Hard Drive Requirement: 2.5 inch SATA hard drive
Port: SATAIII/USB3.1 type-C
Compatible System: Windows7/8/10, Mac OS, Linux
Hot Swap: Supported
Sleep Mode: None
Length of USB Cable: 30cm
win7 W300 R300
win8 W400 R400
win10 W400 R400
MAC OS W400 R400