Items 1 to 12 of 31 total
Browse By
Category
  1. HDD Enclosures (12)
  2. HDD Docking Station (6)
  3. Adapters & Mounting (9)
  4. Hard Drive Cases (5)
Features ABS plastic material; Delicate and simple appearance, exquisite workmanship provides excellent performance Compatible operating systems with Windows 2000/Windows Me/Windows 98/ XP /Vista/ 7/ 8, Mac OS 9.1/10.8.4 above; Backward compatible with USB 2.0 /1.1 connections USB3.0 transfer interface, maximum capacity reach 5Gbps; Support hot-swap,Plug &play; Blue and red power s Tool free, No Reboot and Additional Driver is needed, easy to install and disassemble; Built-in foam pad, protect hard disk effectively Suitable for 9.5mm and below thickness 2.5'' SATA HDD; Converts any 9.5mm & 7mm 2.5'' SATA HDD/SSD into an external hard drive for ultimate mobility and convenience
COMPATIBLE: The Inateck internal mounting bracket supports 2.5” drives (SSD and HDD) and fits all popular PC casings. EFFICIENT: The possibility to mount two 2.5” drives frees up valuable space for additional PC components. HIGH-QUALITY: To ensure a uniform appearance of the PC’s interior, the bracket is made of a high-quality metal alloy. Therefore, the frame is extremely durable as well. SIMPLE INSTALLATION: Quick and simple installation and mounting is ensured by fully facilitating the enclosed tools and accessories. Furthermore, a precise fit is guaranteed. ACCESSORIES INCLUDED: The package contents include two ATX/4 pin power cables, two SATA data cables, one small screw driver and all screws to successfully install the drives.
  • Superspeed USB 3.0 connections up to 5 Gbps ;Built-in ASM1153E chipset supports SATA III with up to 6Gbps Signal bandwidth at for extra fast backups ; Support UASP targeted at SSD.
  • Compatibility with Windows XP/Vista/7/8/8.1, Linux/Android, Mac OS 10.3 and higher. Support all standard 2.5/3.5 inch SATA I/II/III drives (up to 10TB Max); Backwards compatible with USB 2.0/1.1 connections.
  • Internal layer of smooth and slip resistant PU leather, protection against scratches.
  • The durable Aluminum-alloy material promises ultra-light portability and exquisite craftmanship ; Featured with highly effective heat dissipation ; non-slipping rubber pads on all four corners; Two LEDs indicate power status ( Green ) and activity status (Blue ).
  • Plug and Play; Hot-swap, no reboot or additional drivers are needed; 12V/2A power adapter provides stable power supply.
  • Automatic sleep function: Features automatic sleep and spin-down, goes into sleep mode automatically after 30 minutes in idle state. LED flashes each three seconds to indicate standby, a single access to the drive restores the operational mode. Sustainable power management and environmental protection ensured.
  • Suitable for 9.5mm and below thickness 2.5-Inch SATA HDD; Converts any 9.5mm & 7mm 2.5-Inch SATA HDD/SSD into an external hard drive for ultimate mobility and convenience.
  • Features ABS plastic material, contemporary and reliable design; Top-grade JSM578 chipset, theoretical USB 3.0 speeds of up to 5 Gbps, downward compatibility with USB 2.0/1.1.
  • Compatible with all Windows versions and Mac OS; eye-pleasing HDD LED activity indicator; Support hot-swap,Plug & play.
  • Tool free, No Reboot and Additional Driver is needed, easy to install and disassemble; Built-in foam pad, protect hard disk effectively.
  • Compatible with most 2.5" hard drives on the market.
  • Water-repellent EVA plastics, stable and durable.
  • Special double-layered protective application, shock and shake resistant.
  • Two internal straps keep your drives placed steadily even if a shock.
  • Dimension: 17*12*3cm, it can include one 2.5 inch hard drive and other electronic gadgets.
APPLICATION: Inateck SATA data cables (48 cm) incl. power conversion cables (16 cm) can connect to devices featuring SATA connectors (HDD, SSD, CD DVD Bluray drives). HIGH-QUALITY: SATA III cable + power conversion cords realise fast and interference-free data and power transmissions. The plugs are crafted in a precise & durable way. INTERFACES: SATA III male to SATA III male, 4-pin ATX male to 2x 15-pin SATA female & 15-pin SATA male to 2x 15-pin SATA female. FAST TRANSMISSION: The SATA III cable reaches theoretical top speeds of up to 6 Gbps, while being also fully downwards compatible with SATA I & II. PACKAGE CONTENTS: 2x SATA III data cable straight to straight plug 48 cm; 4-Pin ATX to 2x 15-Pin SATA power cable 16 cm; 15-Pin to 2x 15-Pin SATA power cable 16 cm
  • Compatible with most 2.5" hard drives on the market.
  • Water-repellent EVA plastics, stable and durable.
  • Special double-layered protective application, shock and shake resistant.
  • Two internal straps keep your drives placed steadily even if a shock.
  • Dimension: 17*12*3cm, it can include one 2.5 inch hard drive and other electronic gadgets.
  • Supports M50 mSATA SSD (50 * 30 * 4mm); mSATA interface, make full use of your idled 50mm mSATA hard disk;
  • SuperSpeed USB 3.0 supports transfer rates up to 5 Gbps - The actual transmission speed is limited by the setting of the device connected
  • LED for fast and informative information about operation status; supports Plug & Play, no reboot is required;
  • Supports automatic sleep, the enclosure will go to sleep when there is no data reading or writing in 10 minutes, which saves energy and extends hard drive life.
  • Compatible operating system environments: Windows / 7/8/10, MacOS 9.0 and above, Linux
Ventilation holes on the bottom to ensure better heat dissipation and stable operation. Compatible with 2.5 and 3.5 Inch SATA hard drives (SATA-I/II/III). Includes a foam pad to make your hard drives steady. Connects via SuperSpeed USB 3.0, speed up to 5Gbps, ten times of USB 2.0. Compatible Systems with Windows 2000/ XP /Vista/ 7/ 8, Mac OS 9.1/10.8.4 or above; Backward compatible with USB 2.0 /1.1 connections. Package: 1x USB 3.0 Docking Station; 1x USB3.0 Data Cable; 1x Power Supply.
Compact design, versatile functions, enables access to three drives simultaneously; All-new, improved upgrade solution; additional power switch, blue LED for indication of operation and power status The converter can support up to three drives simultaneously, it is compatible with 2.5"/3.5" IDE/SATA hard drives and 5.25" IDE/SATA CD/DVD drives. Compatible Systems: Windows XP/Vista/7/ 8/10 (32bit and 64bit); Mac OS 10.X (OTB mode isn't applicable for W8 and Mac) SuperSpeed USB 3.0 supports transfer rates of up to 5Gbps - The actual transmission speed is limited by the setting of the device connected; Downwards compatible with USB 1.1/2.0. Simple, reliable and stable; Plug and play, hot swap; One Touch Backup function; On/Off Switch for HDD protection
Compatible with USB3.0/USB2.0/USB1.0, supports 2.5" SATA hard drive/solid state drive. Support hot swapping, powered directly from the USB port. Compact and lightweight make it is easy to collect and carry. Fair price with high quality provides you excellent experience. Weight: 33g; Main material: ABS; Length of the USB cable: 30cm; Port: SATA2/USB3.0
Support for standard 2.5 "and 3.5" SATA hard drives (SATA-I/II/III); Support Up to 10TB, Compatible Operating Systems with Windows 2000/ XP /Vista/ 7/ 8, Mac OS 9.1/10.8.4 or above; Backward compatible with USB 2.0 /1.1 connections Equipped with USB 3.0 super speed up to 5Gbps, Ten times of USB2.0 - The actual transmission speed is limited by the setting of the device connected Built-in Power Control Switch; Stable and reliable DC power source: The power supply is highly efficient (12V, 2000mA), so that a stable energy supply is guaranteed Support Plug & Play, Tool free, No Reboot and Additional Driver is needed, Easy Mount & Dismount SATA Hard Drive without tools and screws; easy to install; LED indicators display the status Package: 1x USB 3.0 Docking Station; 1x USB3.0 Data Cable; 1x Power Supply; 1x Manual