12 Item(s)
  1. Tool Free USB 3.0 HDD Enclosure (6)
  2. Tool USB 3.0 HDD Enclosure (6)
Features ABS plastic material; Delicate and simple appearance, exquisite workmanship provides excellent performance Compatible operating systems with Windows 2000/Windows Me/Windows 98/ XP /Vista/ 7/ 8, Mac OS 9.1/10.8.4 above; Backward compatible with USB 2.0 /1.1 connections USB3.0 transfer interface, maximum capacity reach 5Gbps; Support hot-swap,Plug &play; Blue and red power s Tool free, No Reboot and Additional Driver is needed, easy to install and disassemble; Built-in foam pad, protect hard disk effectively Suitable for 9.5mm and below thickness 2.5'' SATA HDD; Converts any 9.5mm & 7mm 2.5'' SATA HDD/SSD into an external hard drive for ultimate mobility and convenience
  • Superspeed USB 3.0 connections up to 5 Gbps ;Built-in ASM1153E chipset supports SATA III with up to 6Gbps Signal bandwidth at for extra fast backups ; Support UASP targeted at SSD.
  • Compatibility with Windows XP/Vista/7/8/8.1, Linux/Android, Mac OS 10.3 and higher. Support all standard 2.5/3.5 inch SATA I/II/III drives (up to 10TB Max); Backwards compatible with USB 2.0/1.1 connections.
  • Internal layer of smooth and slip resistant PU leather, protection against scratches.
  • The durable Aluminum-alloy material promises ultra-light portability and exquisite craftmanship ; Featured with highly effective heat dissipation ; non-slipping rubber pads on all four corners; Two LEDs indicate power status ( Green ) and activity status (Blue ).
  • Plug and Play; Hot-swap, no reboot or additional drivers are needed; 12V/2A power adapter provides stable power supply.
  • Automatic sleep function: Features automatic sleep and spin-down, goes into sleep mode automatically after 30 minutes in idle state. LED flashes each three seconds to indicate standby, a single access to the drive restores the operational mode. Sustainable power management and environmental protection ensured.
  • Suitable for 9.5mm and below thickness 2.5-Inch SATA HDD; Converts any 9.5mm & 7mm 2.5-Inch SATA HDD/SSD into an external hard drive for ultimate mobility and convenience.
  • Features ABS plastic material, contemporary and reliable design; Top-grade JSM578 chipset, theoretical USB 3.0 speeds of up to 5 Gbps, downward compatibility with USB 2.0/1.1.
  • Compatible with all Windows versions and Mac OS; eye-pleasing HDD LED activity indicator; Support hot-swap,Plug & play.
  • Tool free, No Reboot and Additional Driver is needed, easy to install and disassemble; Built-in foam pad, protect hard disk effectively.
  • Supports M50 mSATA SSD (50 * 30 * 4mm); mSATA interface, make full use of your idled 50mm mSATA hard disk;
  • SuperSpeed USB 3.0 supports transfer rates up to 5 Gbps - The actual transmission speed is limited by the setting of the device connected
  • LED for fast and informative information about operation status; supports Plug & Play, no reboot is required;
  • Supports automatic sleep, the enclosure will go to sleep when there is no data reading or writing in 10 minutes, which saves energy and extends hard drive life.
  • Compatible operating system environments: Windows / 7/8/10, MacOS 9.0 and above, Linux
USB-C 3.1: Enjoy dependable, high speed data transferring, plus a plug that fits right side and upside down.

All 2.5” HDD/SSD Supported: Turn your 2.5” HDD/SSD into a portable external hard drive that’s compact and easy-carry wherever you go.

6 Gbps Speed: Optimized for SSD with a ASM225cm chip and compatible with SATA I/ II/ III for the fastest possible data transfer speeds.

USB-C to USB-C cable: Come with a complimentary USB-C cable. Perfect for USB C compatible devices, like the 2016 MacBook Pro and MacBook 12 inch.

Installation-Free: No drivers or tools needed. Plug it in and go. Hot-swap supported.
  • Automatic sleep function: Features automatic sleep and spin-down, goes into sleep mode automatically after 10 minutes in idle state. LED flashes each three seconds to indicate standby, a single access to the drive restores the operational mode. Sustainable power management and environmental protection ensured.
  • Features ABS plastic material, contemporary and reliable design; Top-grade Jmicron JMS567 chipset, theoretical USB 3.0 speeds of up to 5 Gbps, downward compatibility with USB 2.0/1.1.
  • Suitable for 9.5mm and below thickness 2.5-Inch SATA HDD; Converts any 9.5mm & 7mm 2.5-Inch SATA HDD/SSD into an external hard drive for ultimate mobility and convenience.
  • Tool free, No Reboot and Additional Driver is needed, easy to install and disassemble; Built-in foam pad, protect hard disk effectively.
  • Compatible with all Windows versions and Mac OS; eye-pleasing HDD LED activity indicator; Support hot-swap,Plug & play.
Suitable for 2.5'' SATA HDD and SSD; Converts any 9.5mm and 7mm 2.5'' SATA HDD/SSD into an external hard drive for ultimate mobility and convenience. Automatic sleep mode, power saving and sustainable, effective protection of your drive.Entering sleep mode after 10 minutes of data access inactivity. Compatible operating systems with all Windows versions and Mac OS; Backward compatible with USB 2.0 /1.1 connections. USB 3.0 transfer interface, maximum transfer speeds of 5Gbps; Supports hot-swap, plug and play. LED light indicates Power and Activity status. Built-in foam pad, tested ABS plastic material, contemporary and reliable design for the best protection.
Wide Application: The USB 3.0 SATA enclosure supports various kinds of 2.5 inch 7mm or 9.5mm SATA I/II/III HDDs and SSDs with capacities up to 2TB

High-speed Transfer: SATA III is available with a bandwidth of 6 Gbps and it’s backward compatible with SATA I and SATA II. UASP supported, to ensure high-speed transfer.

Universal Compatibility: The enclosure uses the high-end ASM1153E chip, compatible with Windows 2000/Windows 98/ XP/ Vista/ 7/8/10, Linux, Mac OS 9.1/10.8.4 and above

Smart Functions: Starts sleep mode automatically after lying idle for 30 minutes, with an LED indicator entering breathing mode. This reduces unnecessary power draw, lengthens the hard drive’s life.

Unique Design: Ring-shaped indicator complements the unique design, which adds a sense of science to the enclosure, aesthetic in look and convenient in use.
2.5 inch SATA HDD/SSD: Specifically support all standard 2.5 inch 7.5 mm or 9.5 mm thickness SATA HDD/SSD with SATA III plug, downward compatibility with SATA II/I interface.

Standard USB 3.0: Come with USB 3.0.and downwards compatible with USB 2.0. Featured ASM153E chip and UASP support 5 Gbps transmission speed, accelerating the reading and writing speed of SSD.

Universal Compatibility: Work with Mac OS 9.1/10.8.4 and above; Windows XP and above. Support plug and play, hot-swappable,no drives needed.

Durable & Long-Lasting: Aluminum alloy cover makes the enclosure antistatic and durable. Better in heat-dissipation than plastic enclosure.

Easy User Interface: The LED indicator helps you monitor the enclosure’s working status anytime.
Upgraded M.2 Adapter: Compatible with M.2 hard drives of multiple standards, including 2242, 2260, 2280etc. Supports M.2 port of SATA protocol (not support PCI - E or NVMe protocols). 6Gbps bandwidth supported for a lightning data read-write speed.

USB 3.0 Port: Micro B USB 3.0 equipped to satisfy high-speed transmission need, backward compatible with USB 2.0 and USB 1.1. Uses ASM1153E chip, UASP supported, with transfer speed up to 400MB/S.

Wide Compatibility: Work with Mac OS 9.1/10.8.4 and above; Windows XP/7/8/10. Hot-swappable, no driver needed, just plug and play!

Endurable Quality: Aluminum shell resists statics effectively. Performance in heat dissipation is better than a regular plastic shell, rendering the product life even more durable. A blue LED indicator is set to inform you of the working status.

Super Convenient:Packaged with screwdriver and other tools to facilitate installation. Stylish in appearance, compact in dimensions. Great little enclosure that is super convenient in carrying around.
USB3.1 Gen 2: Newest USB3.1 Gen II is adopted, which guarantees steady and efficient data transfer, real 10Gbps transmission. Downwards compatible with USB3.0/USB2.0. USB-C port is utilized.

Two HDD/SSD Supported: Two 2.5” 2TB SATA HDDs or SSDs are supported, with total capacity reaching 4TB. The maximum thickness of hard drives can be 8mm.

Four Modes Supported: The enclosure supports 4 modes: RAID0, RAID1, JBOD, and NO-RAID. The tool free alter mode comes on by simply toggling the switch.

Good Compatibility: Compatible with Windows 7, 8,10 and above, Mac OS 10.11 and above. Supports 12 inch Macbook, Macbook Pro 2016 and devices with Type C port.

Two Cables Included: Comes with two cables to satisfy different needs. One USB-C to USB-A cable for devices equipped with USB A port, and the other USB-C to USB-C cable for devices equipped with USB C port.
For mSATA SSD: USB3.0 to mSATA SSD enclosure, perfectly fit M50 mSATA SSD(50*30*4mm).

Standard USB 3.0: Come with USB 3.0, downwards compatible with USB2.0 and USB1.0. Featured ASM153E chip and UASP support 5 Gbps transmission speed, accelerating the reading and writing speed of SSD.

Universal Compatibility: Work with Mac OS 9.1/10.8.4 and above; Windows XP and above. Support plug and play, hot-swappable,no drives needed.

Durable & Long-Lasting: Aluminum alloy cover makes the enclosure antistatic and durable. Better in heat-dissipation than plastic enclosure.

Easy to Use: Come with screw tools. Compact size makes it portable. The LED indicator helps you monitor the enclosure’s working status anytime.