Hard Drive Enclosure for M.2 NVMe with USB 3.2 & Fan, FE2023

SKU: Inateck FE2023_gray_US
Hard Drive Enclosure for M.2 NVMe with USB 3.2 & Fan, FE2023
Hard Drive Enclosure for M.2 NVMe with USB 3.2 & Fan, FE2023
Hard Drive Enclosure for M.2 NVMe with USB 3.2 & Fan, FE2023
Hard Drive Enclosure for M.2 NVMe with USB 3.2 & Fan, FE2023
Hard Drive Enclosure for M.2 NVMe with USB 3.2 & Fan, FE2023
Hard Drive Enclosure for M.2 NVMe with USB 3.2 & Fan, FE2023
Hard Drive Enclosure for M.2 NVMe with USB 3.2 & Fan, FE2023

Hard Drive Enclosure for M.2 NVMe with USB 3.2 & Fan, FE2023

SKU: Inateck FE2023_gray_US
Regular price $19.99
/
Shipping calculated at checkout.
  • FREE & Fast Shipping to the US
  • Ship to 16 Countries
  • Safe & Secure Payment
  • Lifetime Tech Support
  • In stock
  • Inventory on the way
  • Superb Heat Dissipation: The built-in cooling fan can lower the operating temperature from 95 ℃ to 65 ℃, which can prevent slowdown caused from overheating and prolong the life of your hard drives.
  • High-speed Data Transfer: With the USB 3.2 Gen 2 protocol, the real-time read/write speed of your drive can reach up to 1000 Mbps.
  • Wide Compatibility: This enclosure supports a wide range of M.2 NVMe SSDs with M Key interfaces and B & M key interfaces in the following drive sizes: 2230, 2242, 2260, 2280.
  • Supported Drive Capacity: This enclosure is applicable to SSDs with up to 4TB capacity.
  • Additional Cloning Software: If you purchase any Inateck digital products for your hard drives, we will offer you extra Inateck cloning software which could be used for data backup, data migration, etc.
M.2 enclosure

Cooling Fan

Unlike most drive enclosures, Inateck FE2023 enclosure is equipped with a cooling fan to lower the operating temperature during use, which can not only prevent slowdown caused from overheating to make stable transmission but also prolong the life of your hard drives.

m.2 enclosure usb 3.2

USB 3.2 Gen 2 Protocol

The type C connector adopts the USB 3.2 Gen 2 protocol so that the transfer speed of your M.2 NVMe drive can reach up to 1000 Mbps. For example, it just takes seconds to transfer a Blu-ray movie with a few gigabytes.

m.2 enclosure

Wide Compatibility

Inateck FE2023 enclosure supports M.2 NVMe SSDs with M Key interfaces and B & M key interfaces in the following drive sizes: 2230, 2242, 2260, 2280.Note: This enclosure only works with M.2 NVMe SSDs (NOT applicable to M.2 SATA SSDs).

m.2 enclosure

Auto Sleep

To better protect your drive and prolong its life, the enclosure will enter sleep mode with the off indicator automatically after 5 minutes of inactivity.

m.2 enclosure with online clone

Highly-recommended Cloning Software

If you purchase any Inateck digital products for your hard drives, you'll get our Inateck cloning software which can also be used to backup the data of your computer system and to migrate the data from your old drive.

FAQ

1. Why does the speed fail to reach 10Gbps?

Please check if the connected USB port supports USB 3.2. 2. Please use the cable that comes with the enclosure.

2. About the Cable

According to our survey, one of the USB cables will be idle for most users. For environmental reason and 10Gbps speed, this enclosure will come with a USB C to USB C cable. If there's only a USB A port, here're some cost-effective USB cables. Please refer to the Inateck CA1006 in the table below.

3. About the Fan

The speed of the cooling fan can reach 6500 RPM, which can reduce the temperature of the drive from 95℃ to 65℃. To run the enclosure properly, please don't demount the fan or use any external temperature controller.

4. Tool-free Installation

1). Press both sides to pull out the drive tray.

2). Place the drive face up 3. Push the round fixator outwards and snap the drive. 4. Put the tray into the enclosure. If you'd like to remove the drive from the tray, please toggle the round fixator outward and the drive will pop out.

About Payment

1. What payment methods are supported?

Inateck website supports various of payment methods as follows, safe and easy:

  • Paypal
  • Credit Card (MasterCard, Visa, Discover and American Express, etc.)
  • Google Pay
  • Apple Pay
  • Shop Pay
  • Bank Deposit

2. Do I need to pay for the customs tax?

For US customers, there’s no extra customs tax and duties at all, as the products on US site are all shipped from our US warehouse directly.

For customers from other countries, usually there’s no tax for low-valued products below thresholds. But for products with higher value, tax and duties may occur and you have to be responsible for it yourself. Tax threshold differs from country to country. Please refer to the customs policy according of your own country. 

 

About Delivery

1. What are your shipping regions?

We delivery to these regions: US, Canada, Mexico, Brazil, Australia, New Zealand, Singapore, India, Hong Kong, Taiwan, Korea, Malaysia, Philippines, Russia, United Arab Emirates. 

If you are in EU, you can order from our Germany site inateck.de, with local Germany delivery.

If you are not within these countries, please kindly Email support@inateck.com, we will guide you how to make the purchase.

2. How much is the shipping fee?

  • For the orders equal to or over $25 to the US, free shipping is provided, excluding subsidiary islands or remoted areas like military districts of United States.
  • For the orders less than $25 to the US, the shipping fee is $4.99 for most products.
  • For all the orders to other countries, the shipping fee depends on the product amount and quantity, please check the specific shipping fee on the checkout process.

Please kindly pay attention:

  • We don't offer free shipping to certain subsidiary islands of United States, including Virgin Island USA, Guam USA, Hawaiian Islands USA etc.
  • Some remote areas including military districts, or some bulk items like Tomons lamps may require additional charges. The specific cost depends on the standards of various courier companies.

3. How long does it to take to ship my order?

After your order payment confirmation, we will send the parcel usually in 1-2 business days. It usually takes about 3-7 business days for you to receive it within the US, or 7-10 days outside of it.

4. How can I change my shipping address after placing an order?

In this case, please kindly contact our customer service by Email support@inateck.com within 12 hours. Otherwise, the item will be shipped to the original address and you have to contact the carrier directly yourself.

5. What's your shipping carrier?

We use world-famous USPS or UPS for shipping your products, which can secure the fast speed as well as safety.

6. How to track my order?

Once your parcel is shipped, we will send you an Email with tracking info and link, you can check it yourself afterwards. If you do not receive this Email, please contact our customer service.

7. What should I do if I received the wrong item(s) or an item(s) is missing?

Please contact our service team within 7 days of receiving the wrong item(s) or have discovered you are missing an item(s). We will correct any order errors as soon as possible!

 

Other FAQ

 

1. Can I cancel my order after shipment?

Orders cannot be cancelled once they are shipped.

2. How do I return my item?

We provide 30-day money back guarantee for Inateck products. If you have met a quality-related issue and need to return the item back, you can just Email support@inateck.com. Our customer service will help you with the return.

3. How to remove my account registered on your site?

If you don’t need the account registered on Inateck site anymore, please contact our customer service by Emailing support@inateck.com, we will help you remove it.

Collaboration Policy

1. Requirements

You are good at photography, making video, or creating content. You have positive interactions with your audiences.

2. What benefits you will get?

Free products trial. If you have done great work, you may get the long-term sponsorship.

3. What you need to do?

You should take photos or videos, complete your content and post them on your blog or social media channel within 30 days of receiving the parcel. When you publish your content, please include the link of the product page or the link of home page(www.inateck.com) if it is possible.

4. Notice

Inateck may collects your photos, videos and contents. For example, we may share it on Facebook and Instagram, or use your photos on our website and on the product page at amazon. If you do not agree, please let us know in advance.